DC-DC isolated power module based on an "MEAN WELL" SCWN06x-xx / DCWN06x-xx series
6W Datasheet
Input voltage options: 12, 24, 48 VDC.
Single output voltage options: 3, 5, 12, 15 VDC
Dual output voltage options: +/-5, +/-12, +/-15 VDC
Mounted with a turret connection, 2 through-hole pads, and 1 surface-mount pad per connection. DC-DC module mounted on a socket for easy replacement.
This module is sturdy when mounted with only 2 standoffs (one in each corner) and extremely solid when all 4 are used.
Use one or more of these to create isolated power rails for your project. These are built well - short circuit (continuous), overload, and under voltage protection. Fully encapsulated, 3KVDC isolation.
It is always much easier to work with electronics when everything is isolated. Easier to connect to test equipment or sensors and actuators. Bring in a single nominal 12, 24, or 48 VDC and then split it up as-needed into isolated rails. Or just create an isolated rail for something key.
These make absolutely no audible noise that we can tell. Solid units.
Module size: 2.5"x1.5" nominal (2.4"x1.4" actual).
Mounting holes: 4x #4 screw holes (0.116") on 0.5" grid. 2"x1"
Vertical height: ~9/16"
Contents: module PCB with power module and turrets installed, no hardware or additional components.
Part numbering:
Voltage Input - Single/Dual - Voltage Output
03 version is actually 3.3 VDC
Example: 24-D-12 has 24VDC input and dual (+/-) 12VDC output.